Shop by Category

Disluz coating

As low as13,77 € (IVA Included)

Short Descriptions

Recubrimiento Disluz.

Interior exterior.

Aplicación con Rodillo, Brocha y Pistola.

Rendimiento 4-5 m2/L (aprox).

Agua de limpieza.

Details

Dislight coating.

Interior Exterior.

Application with Roller, Brush and Gun.

Yield 4-5 m2/L (approx).

Cleaning Water.

 

PROPERTIES:

- High opacity

- Excellent whiteness. great light

- Resistance to abrasion and atmospheric agents

- Excellent adherence on all supports used in construction.

- In pluviometric zones it gives very good results outdoors.

- Breathable. Anti condensation.

 

USE: Product intended for the decoration and protection of porous surfaces outdoors.

 

TECHNICAL DATA: Appearance Matt Color White and colors Adhesion Excellent Thinner Water Density 1.60 ±0.05 kg/L Yield 4-5 m2/L - Touch 30 min Drying Time - Repainting 8 hours - Total 20 days (depending on room temperature)

 

APPLICATION: Shake the product until it is perfectly homogenized. The surfaces to be painted must be clean, dry and free of dust, grease, salt, etc. Apply a first coat diluted with water at 10-20% and the second coat at approximately 5-10%. Use to dilute clean water. Do not apply at temperatures below 5ºC, or above 35ºC, or outdoors when rain is expected, or with relative humidity above 80%. Do not store more than 12 months. If the product is not going to be used, for better preservation, avoid adding water. It is convenient not to wash the walls until 28 days after its application. Tools: Brush, roller or spray gun

 

SUPPORT PREPARATION

NEW OR UNPAINTED SUPPORTS: On plaster or stucco surfaces, apply when they are completely dry. On concrete and cement surfaces, do not apply until fully set. On excessively polished surfaces, sand to open the pore, clean the support well, if it has damage putty. Apply a coat of ACRYLIC FIXER, facilitating the subsequent application of paint.

 

OLD SUPPORTS OR IN POOR CONDITION On painted supports, if they are in good condition, sand and proceed as new. If the support is in poor condition, remove and scratch the poorly adhered parts, putty and sand. If there are mold and algae stains, clean and disinfect by vigorously rubbing with a brush using household bleach. Apply a coat of ACRYLIC FIXER.

 

SAFETY AND HYGIENE

Protect the containers from frost, direct exposure to the sun and very high temperatures. Do not eat, drink or smoke during its application. In case of contact with eyes wash with plenty of clean water. Suitable for domestic use. Not suitable for children's use. Keep out of reach of children. Apply in well ventilated environments. If applied by spray, wear a mask. Do not bite the painted surface.

 

ENVIRONMENTAL PROTECTION

Take all necessary measures to avoid the production of waste as much as possible. Do not pour waste into the drain or in any other way that damages the environment. Look for possible revaluation or recycling methods. Waste must be handled and disposed of in accordance with current legislation. Empty containers and packaging must be disposed of in accordance with current legislation.

×